Structured Cabling · Switching · Network Security
Structured Cabling & Network Infrastructure in Brunei
Structured cabling, managed switching and routing for offices, shops and multi-floor buildings across Brunei. The wired network your WiFi, cameras and POS all run on top of.
- Structured Cabling
- Managed Switching
- Network Segmentation
What we build
The Network Underneath Everything Else
Cameras, tills, phones and WiFi all sit on the same wired network. If that layer is wrong, everything above it is unreliable.
Structured Cabling
Cat6 runs, patch panels, wall outlets and a labelled rack, installed by our own technicians. Cabling is the part nobody sees and the part that decides whether the network is still reliable in five years, so it is done properly the first time rather than patched later.
Switching and Routing
Managed switches and routers, configured rather than plugged in and hoped for. Capacity worked out against how many devices actually connect, with PoE where cameras and access points need power over the same cable that carries their data.
Network Segmentation
One building, several networks that cannot see each other. Your cameras, your POS terminals, your staff and your guests each get their own segment, so a visitor on the guest WiFi has no route to your file server and a compromised camera cannot reach your tills.
- Separate networks for staff, guests, cameras and POS
- Guest traffic with no route to business systems
- CCTV kept off the network your tills run on
- Firewall rules written to your actual layout
- VLANs configured on the switches, not left to chance
Where it matters
Built Into the Building, Not Bolted On
The cheapest time to cable a building properly is before anyone moves in. The second cheapest is now.
New Offices and Fit-Outs
Cabling planned into the fit-out while the ceilings are still open, so every desk, camera and access point has a proper run rather than an extension lead and a length of trunking.
Multi-Floor and Multi-Building Sites
One network across several floors or buildings, with the backbone sized for what actually crosses it and a rack you can trace a fault in.
Retail and F&B
Tills, card readers, back office and customer WiFi on one cabled network with the payment side segmented off, so a busy Saturday does not take the tills down with it.
Warehouses and Industrial Units
Long runs, high ceilings and hard environments. Cabling routed and protected for a building where forklifts work, not an office.
Hardware
Hardware We Supply and Install
The platforms we install, configure and support. Which one suits your site comes out of the site visit.
Looking for WiFi?
Access points, mesh WiFi and guest WiFi with a login page are on their own page. This one covers the cabling, switching and routing underneath. Most jobs need both, and we quote them together.
How it works
From Site Visit to Supported Network
Five steps. You get a written quotation before anyone drills anything.
-
01
Site Visit
We walk the building — floors, ceiling voids, riser routes and where the rack can live. The visit is free and there is no obligation.
-
02
Network Design
Cable routes, outlet positions, rack layout, switch capacity and segmentation, written up as a quotation.
-
03
Cabling and Installation
Our own technicians run and terminate the cable, fit the outlets and build the rack. Labelled at both ends.
-
04
Configuration and Testing
Switches, routers, VLANs and firewall rules configured, then every run tested and the results handed over.
-
05
Handover and Support
Documentation and labelling handed over, then we look after what we installed — changes, additions and fault response.
Questions
Networking Questions We Are Asked Most
Straight answers before you commit to anything.
It depends on the number of points and how accessible the routes are, not on floor area. A small office fit-out is usually a matter of days; a multi-floor building with closed ceilings takes longer, because the routes have to be found before anything is pulled. The site visit is what turns that into a real number.
Yes. Most of our work is in buildings that cannot close, so runs are staged and the cutover is done outside trading hours. We agree the sequence with you before we start rather than discovering it on the day.
Yes, and usually in the same job. Cameras, tills and access points all run on the same structured cabling, so doing it once is cheaper and tidier than three separate visits — and it is why the network gets segmented properly rather than everything sharing one flat network.
Often yes. Existing cabling and switches can frequently be reused or folded into a larger design rather than replaced. Send us the make and model and we will confirm what can be kept before quoting.
We are based in Brunei and our own installation team looks after what it installs. After-sales support covers configuration changes, additions and fault response, remotely where possible and on site where it is not.
Ready to Sort Out the Network?
Tell us about the building and what is on the network now. We will arrange a visit and quote from what we find.
Mobile & WhatsApp
Office
Business Hours
Monday - Saturday